Installation Instructions - Vimar Elvox 6029 Instrucciones Instalador - Manual Do Instalador

Petrarca: 6029 - 6029/C
Petrarca series monitor 6029 or 6029/C can work in conjunction with interphone 6209 or 62I8 for video door entry systems
series Due Fili Plus or Two wires Videokit.
TECHNICAL CHARACTERISTICS OF 6029
- Wall-mounted monitor with B/W screen, 3,5"
- Video signal standard: CCIR with 625 lines and 50 frames (EIA standard available on request)
- Passband: 4 MHz
TECHNICAL CHARACTERISTICS OF 6029/C
- Wall-mounted monitor with LCD colour screen, 3,5"
- Video signal standard: PAL

INSTALLATION INSTRUCTIONS

Fix the bracket type 6145 to the wall at a height of approximately 1.4 m above the ground (Fig. 2).
Open the interphone, split the cover from the bottom making pressure on the lower side of the cover (Fig. 3 - 4).
Fit the base of the interphone into the appropriate seats to the left of the bracket. Slide the base of the interphone downwards
until it is completely fastened. Connect the wires to the terminals of the interphone and monitor card (Fig. 5)
Connect the wiring of the monitor to the connection card by means of connector CN1 on the card.
Fit the monitor in the appropriate seats in the bracket. Slide the base of the monitor downwards until it is completely fastened
(Fig. 6).
Close the interphone by hooking the cover onto the base and pressing the bottom of the cover until it clicks shut. To remove
the interphone or monitor from the bracket, press the safety tab with a screwdriver in the direction of the arrows (Fig. 7).
DESK-TOP CONVERSION KIT FOR MONITOR AND INTERPHONES
Open the interphone, split the cover from the bottom making pressure on the lower side of the cover (Fig. 3, 4).
Fit the base of the interphone into the appropriate seats to the left of the bracket. Slide the base of the interphone downwards
until it is completely fastened. Connect the wires to the terminals of the interphone and monitor card (Fig. 9).
Connect the wiring of the monitor to the connection card by means of connector CN1 on the card.
Fit the monitor in the appropriate seats in the bracket. Slide the base of the monitor downwards until it is completely fastened
(Fig. 9).
Close the interphone by hooking the cover onto the base and pressing the bottom of the cover until it clicks shut. To remove
the interphone or monitor from the bracket, press the safety tab with a screwdriver in the direction of the arrows (Fig. 9).
3