Storage; Trouble-Shooting - Silvercrest SSM 300 A1 Instrucciones De Servicio

__RP93358_B5.book Seite 31 Dienstag, 10. Dezember 2013 11:56 11
3. Wipe the motor unit 4 and the power
cable 1 with a slightly moistened cloth,
if necessary.
4. The blender 5 may be washed by
hand.
5. Allow the parts to dry completely before
putting them away.
Some cleaning tips
• Preferably clean the blender 5 immedi-
ately after use, to prevent food residues
from drying on and sticking to the hand
blender.
• After processing very salty foodstuffs,
the blender 5 should be rinsed immedi-
ately.

8. Storage

DANGER for children! Keep the
device out of the reach of children.
DANGER! In order to avoid accidents, the
mains plug 1 must never be connected to a
wall socket while in storage.
• Select a location where neither high
temperatures nor moisture can affect the
device.

9. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair the
device yourself under any circum-
stances.
Possible causes/
Fault
• Has the device been
connected to the pow-
No function
er supply?
• Check the connection.
• Switch off immediate-
ly, pull out mains
The blade of plug|1 and check:
the blender 5 - Blockage in the ves-
is turning with sel?
difficulty or not - Food too tough or
turning at all too hard?
- Device not assem-
bled correctly?
Action
31
GB