Rollixo RTS
Checking the direction of rotation of the motor and adjustment of the motor end limits
[1]. Press simultaneously on the
down movement occurs to enter motor adjustment mode.
Indicator light 1
flashes slowly.
[2]. Press button
or
to check the motor's direction of rotation.
• If the motor's direction of rotation is correct, move on to step [3] of the
motor end limit setting procedure.
• If the direction of rotation is incorrect, press button
up and down movement occurs, check the motor's direction of rotation
again and move on to step [3] of the motor end limit setting procedure.
[3]. If the motor end limits are already set, move on to step [8] to exit motor
adjustment mode.
If the motor end limits are not set, check that the motor is released: the two
push-buttons should be pressed.
Note: The motor end limits can also be set with a setting tool (ref. 9015971).
In this case, set the motor end limits with the cable then move on to step
[8] to exit motor adjustment mode.
[4]. Press button
to position the garage door in the upper position.
Adjust the upper position with buttons
[5]. Press the motor's upper end limit push-button.
[6]. Press button
to position the garage door in the lower position.
Adjust the low position with buttons
Copyright © 2012 Somfy SAS. All rights reserved
and
buttons until the motor's up and
until the motor's
STOP
and .
and .
1
2
STOP
1
2
STOP
Correct direction
of rotation
on
1
2
3
4
Prog
STOP
1
2
3
4
1
2
3
4
Prog
STOP
Prog
STOP
oR
1
2
3
4
Prog
STOP
1
2
3
4
1
2
3
4
Prog
STOP
Prog
STOP
3
4
Prog
3
4
Prog
Incorrect direction
of rotation
1
2
3
4
Prog
STOP
7