Fall Protection Motor Wiring - SOMFY HOME MOTION ROLLIXO RTS Manual De Instalación

Rollixo RTS
Motor and fall protection wiring
The receiver must not be connected to the mains power supply during connection to the motor.
Motor wiring
[1]. Connect the motor to the receiver.
Note: the motor's direction of rotation shall then be checked and reversed if
necessary.
[2]. Lock the motor cable with the cable clamp provided.
The motor cable must be placed in the receiver's 230 V insulation area.
fall protection wiring
If no fall protection is connected, it is essential to create the bridge
between terminals 5 and 6 of the receiver (with the shunt supplied, see
page 3, point 11).
Copyright © 2012 Somfy SAS. All rights reserved
M
L1 N L2
1 2 3 4
230v insulation 24v insulation
zone zone
Stop Safety Edge
K
Sec
5 6 7 8 9 1
5