Preliminary Check; Steam Delivery - Sanremo TORINO SAP Libro De Instrucciones

página de 114

/ 114
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

ENGLISH

4) Connect the 3/8" hose to the mains water supply, then to the water softener and the appliance.

Connect to the mains water supply in respect of national legislation.

N.B. The water softener is indispensable for correct operation of the appliance, to optimise coffee delivery in the cup and to extend the working life

of components, as it purifies the water from limescale and residues that would otherwise shorten working life.

Failure to follow these instructions absolves the company from all liability.

Before connecting the pump intake tube, open the tap and run water through the water softener for about two minutes to eliminate possible.

The impurities filter (code 10355150) is normally

mounted on the hose connecting the purifier to the

pump (fig. A) to prevent impurities in the water from

damaging downstream components such as the

pumping head, flow pumps, solenoid valves, etc.

The capsule filter (code 10355162) which blocks

the impurities present in the water must be repla-

ced about every three months. The three month

period is indicative only as the actual length of time

is correlated to water consumption and the impuri-

ties present in the mains water supply. To replace

the pod filter: unscrew the impurities filter (code

10355150) and replace the pod filter.

Before inserting the new pod filter, make sure the

inside of the body (10355152 and 10355154) is

completely clean. Any foreign matter must be re-

moved to ensure correct filtration.

The impurities filter must be mounted according to

the flow direction indicated by the arrow (fig. A) on

the body.

Before using the appliance, check that:

- the plug is inserted properly into the mains power outlet;

- the water filling hose is correctly connected to the mains water outlet, check for leaks and that the water tap

is open;

- the drain pipe is positioned in accordance with the preceding instructions.

With a steam tap (B) open, put the on/off switch (D) to position 1 and wait for the water in the boiler to reach

the maximum level set by the electronic control. If the boiler does not fill within the set time-out (90 sec.), the

pump stops and the indicator lights on the keypad start to blink. In this case put the on/off switch (D) to position

0 and then to position 1 to finish filling the boiler.

Now put the on/off switch (D) to position 2 so that the heating elements are powered and therefore start to heat

the water.

Wait for steam to come out the steam nozzle (B), then close the tap and, using the Boiler pressure gauge, check that the pressure has reached and

maintains a value of 0.8:1 bar. If this is not the case, use a screwdriver to regulate the adjustment screw in the pressure switch (+ to increase, - to

decrease, see figure below).

If the control panel malfunctions, the appliance can still be operated manually using manual boiler fill (A).

With the visual aid of the level indicator (L), press the manual fill knob (A) until the water fills the boiler, taking care not to exceed the maximum level

shown on the indicator (L), then release the knob. To deliver the coffee, use the manual switch (R).

To deliver hot water or steam, check on the water level indicator (L) that there is sufficient water in the boiler.

Make sure the boiler pressure gauge shows a pressure of 0.5:1 bars.

Press the button (M6) to deliver hot water, then press again to stop delivery.

Take great care to avoid burns.

All models have two steam nozzles on the sides of the work surface, with the exception of the one group machine which has just one. These

steam nozzles are retractable and can be oriented by means of a ball joint. To deliver steam, turn the knobs (B) anticlockwise. Take great care to

avoid burns.

Insert the filter holder (E) in its seat (F) by turning it anticlockwise. Press the button (I) and release after the required amount of coffee has been

delivered.

IMPURITIES FILTER

USE