Using Your Ceiling Fan - LUCCI FUTURA ECO Manual De Instrucciones De Instalación

Futura Eco Installation Instructions
REMOTE CONTROL
Your ceiling fan is controlled via the remote control. There are 4 buttons (HI, MED, LOW, OFF) to control the fan
speed and one button to control light on/off and dimming function. Fig. 11
Before operating the remote, the following must be considered.
-
2 x AAA 1.5V (size) batteries are required to operate the remote control. Remove the battery cover from the
back of the remote and insert 2 x AAA batteries. Ensure the polarities are correct as shown in the battery
compartment. (Batteries not included.)
- The remote (transmitter) and receiver must be configured so that communication between each other is
paired up. This is achieved by setting the DIP switch on the receiver and remote on the same setting.
Note: The DIP switch assembly has 4 switches which can be setup to 16 different transmitting code
combinations. This is practical when there is more than 1 remote/receiver pair operating locally or in the
same room.
Note: To access the receiver DIP switches, remove the DIP switch cover.
Fig. 9 Remote battery compartment
OPERATING THE REMOTE:
Before you start using the remote, take the time to read through this section and
get familiar with the buttons and function of each button.
1. LED Indicator
The red LED indicator on the top of the transmitter will flash when the buttons are
active.
BUTTONS ON THE REMOTE
2. HI: Press this button to set the fan running at High speed.
3. MED: Press this button to set the fan running at Medium speed.
4. LOW: Press this button to set the fan running at Low speed.
5. OFF: Press this button to turn OFF the fan.
6. : Press this button to change the color temperature in the following order:
3000K → 5000K → 4000K → 3000K
7 | P a g e

USING YOUR CEILING FAN

Fig. 10 Receiver DIP switch
Fig. 11
V 1 . 0