Instructions Pertaining To A Risk Of Fire, Electric Shock, Or Injury To Persons; Work Area; Personal Safety - Campbell Hausfeld CP5211 Manual Del Usuario

Operating Instructions and Parts Manual
Safety Guidelines (Continued)
hazardous situation which, if not avoided, MAY result in
minor or moderate injury.
Notice indicates important information,
that if not followed, may cause damage
to equipment.
NOTE: Note means any additional information pertaining to
the product or its proper usage.
General Safety Information
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS
This manual contains important safety, operational and
maintenance information. If you have any questions, please
call 1-800-330-0712 for customer assistance.
When using tools, basic precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
This product or its power cord may
contain chemicals, including lead, known
to the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
GENERAL
a. To reduce the risks of electric shock, fire, and
injury to persons, read all the instructions
before using the tool. Failure to follow
warnings, dangers, and cautions could result in
DEATH or SERIOUS INJURY.
b. Be thoroughly familiar with the controls and the proper
use of the equipment. Follow all instructions. Contact
your Campbell Hausfeld representative if you have any
questions.
c. Only persons well acquainted with these rules of safe
operation should be allowed to use the unit.
d. Follow all safety codes as well as the Occupational Safety
and Health Act (OSHA).

WORK AREA

a. Keep operation area clear of all persons.
b. To reduce the risk of injury, close supervision is necessary
when the product is used near children.
c. Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. The tool is
able to create sparks resulting in the ignition of
the dust or fumes.
d. NEVER spray flammable liquids or use pressure
washer in areas containing combustible dust,
liquids, or vapors.
e. Never operate this machine in a closed building
or in or near an explosive environment.
2

PERSONAL SAFETY

a. Stay alert. Watch what you are doing and use common
sense when operating the tool. Do not use the tool
while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating the
tool increases the risk of injury to persons.
b. Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long hair
increases the risk of injury to persons as a result of being
caught in moving parts.
c. Do not overreach. Keep proper footing and
balance at all times. Proper footing and
balance enables better control of the tool in
unexpected situations.
not discharge streams at persons. This product is to
be used only by trained operators. Always remove
lance from gun before cleaning debris from nozzle.
d. Keep clear of nozzle. NEVER direct high pressure spray at
a person, animal, or yourself.
e. NEVER put hand or fingers over the spray nozzle while
operating the unit.
f. NEVER try to stop or deflect leaks with any body part.
other personnel in the work area are wearing ANSI
Z87 eye protection equipment, and when required,
other appropriate protection equipment such as
head, hearing protection, gloves, rubber boots, protective
clothing when operating and performing maintenance.
Serious eye or permanent hearing loss could result.
ELECTRICAL SAFETY
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance
for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
conductor can result in a risk of electrocution.
Check with a qualifi ed electrician or service
personnel if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug provided
with the product - it will not fi t the outlet, have a proper
outlet installed by a qualifi ed electrician. Do not use any type
of adaptor with this product.
www.campbellhausfeld.com
Risk of injection or severe
injury. Keep clear of nozzle. Do
Ensuring that the tool is used
only when the operator and all
Improper connection of
equipment-grounding