Things You Should Know - Stanley BA 550/11/200 Manual De Instrucciones

Preserve this handbook for future reference
G
B
1. PRECAUTIONS
These compressors are not suitable for outdoor use.
THINGS TO DO
● The compressor must be used in a suitable
environment (well ventilated with an ambient
temperature of between +5°C and +40°C) and
never in places affected by dust, acids, vapors,
explosive or flammable gases.
● Always maintain a safety distance of at least 4 meters
between the compressor and the work area.
● Any coloring of the belt guards of the compressor
during painting operations indicates that the distance
is too short.
● Insert the plug of the electric cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
● Have the plug fitted by a qualified electrician according
to local regulations. When starting the compressor for
the first time, check the correct direction of rotation and
that this matches the direction indicated by the arrow
on the belt guard (versions with plastic protection) or
on the motor (versions with metal protection).
● Use extension cables with a maximum length of 5
meters and of suitable cross-section.
● The use of extension cables of different length and also
of adapters and multiple sockets should be avoided.
● Always use the switch of the pressure switch to
switch off the compressor or use the switch of the
electric panel for models equipped with this. Never
switch off the compressor by pulling out the plug in
order to avoid restart with pressure in the head.
● Always use the handle to move the compressor.
● When operating, the compressor must be placed
on a stable, horizontal surface to guarantee correct
lubrication.
● Position the compressor at least 50 cm from the
wall to permit optimal circulation of fresh air and to
guarantee correct cooling.
NOT
THINGS
● Never direct the jet of air towards persons, animals
or your body. (Always wear safety goggles to protect
your eyes against flying objects that may be lifted by
the jet of air).
● Never direct the jet of liquids sprayed by tools connected
to the compressor towards the compressor.
TO DO
● Never use the appliance with bare feet or wet hands
or feet.
● Never pull the power cable to disconnect the plug
from the socket or to move the compressor.
● Never leave the appliance exposed to adverse
weather conditions.
● Never transport the compressor with the receiver
under pressure.
● Do not weld or machine the receiver. In the case of
faults or rusting, replace the entire receiver.
● Never allow inexperienced persons to use the
compressor. Keep children and animals at a distance
from the work area.
● This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
a person responsible for their safety.
● Children should be supervised to ensure that they do
not play with the appliance.
● Do not position flammable or nylon/fabric objects
closed to and/or on the compressor.
● Never clean the compressor with flammable liquids
or solvents. Check that you have unplugged the
compressor and clean with a damp cloth only.
● The compressor must be used only for air compression.
Do not use the compressor for any other type of gas.
● The compressed air produced by the compressor
cannot not be used for pharmaceutical, food or medical
purposes except after particular treatments and cannot
be used to fill the air bottles of scuba divers.
● Never use the compressor without guards (belt
guard) and never touch moving parts.

THINGS YOU SHOULD KNOW

● To avoid overheating of the electric motor,
this compressor is designed for intermittent
operation as indicated on the technical dataplate
(for example, S3-50 means 5 minutes ON, 5 minutes
OFF). In the case of overheating, the thermal cutout
of the motor trips, automatically cutting off the power
when the temperature is too high. The motor restarts
automatically when normal temperature conditions
are restored.
● To facilitate restart of the compressor, in addition
to the operations indicated, it is important to
return the button of the pressure switch to the OFF
24