Blade Assembly; Switch Housing Assembly - Craftmade Riata Grande 70 Guia De Instalacion

8. Blade Assembly.

Time Saver: Washers for blade screws can be set
on each blade screw prior to installing blades.
Locate 15 blade attachment screws and washers in
hardware pack. Hold blade arm up to blade (sold
separately) and align holes. Insert 3 blade
attachment screws (along with washers) with
fingers first and then tighten screws securely with
a Phillips screwdriver. Repeat for the remaining
blades.
Remove blade arm screws/lock washers from
underside of motor. If plastic motor locks are
installed with blade arm screws, discard plastic
motor locks (save blade arm screws and lock
washers to secure blade arms). NOTE: Additional
blade arm screws are located in one of the
hardware packs.
Align blade arm holes with motor screw holes and
attach blade arm with blade arm screws/lock
washers. Before securing screws permanently,
repeat with remaining blade arms. Securely
tighten all screws.
NOTE: Tighten blade arm screws twice a year.

9. Switch Housing Assembly.

Loosen 3 screws on fitter plate (on underside of
motor housing). Align slotted holes in top of
switch housing with loosened screws in fitter
plate. Twist switch housing to lock. Securely
tighten all 3 screws.
plastic
motor
lock
*Blade drawings in this manual are representative
only.
motor housing
page 7
motor housing
blade attachment
screws and washers
blade
blade arm
blade arm screws/
lock washers
fitter
plate
switch
housing