Tabla de contenido
Idiomas disponibles
Idiomas disponibles
11. Testing Your Fan.
It is recommended that you test fan before finalizing
installation. Test wall control (optional installation)
by locating ON/OFF slider switch on wall control,
then set to ON position. Test light ON/OFF and then
test fan speeds. Next, locate remote control. Start
with the lights OFF and test the light ON/OFF
function button. Test fan speed with different fan
speed buttons (1 - 6). If the remote control operates
the functions of the fan, battery has been installed
correctly. If the wall and/or remote control do (does)
not operate the fan functions, refer to
"Troubleshooting" section to solve any issues before
contacting Customer Service.
3 4
5
2
1
Fan must be on LOW before setting the fan in
6
reverse. Use
button to recirculate air depending
on the season. A ceiling fan will allow you to raise
your thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
NOTE: If the wall/remote control interferes with
other appliances, change code switches on the wall/
remote control to another code. If you do change
the code, turn power off first. After setting the new
code on the wall/remote control, go back to the
instructions for the LEARN button in Section 10
(page 8).
IMPORTANT: Remote control (and wall control, if
applicable) must be synchronized with fan in order
to properly function.
page 9
Capítulos
Tabla de contenido
