Light Kit Assembly (Optional) - Craftmade Riata Grande 70 Guia De Instalacion

12. Light Kit Assembly (Optional).

WARNING: Failure to disconnect power supply at main
panel prior to light kit assembly may result in serious
injury.
IF YOU WISH TO USE YOUR FAN WITH A LIGHT KIT
(sold separately), loosen 3 screws on switch housing.
Twist switch housing to remove from fitter plate.
(Refer to diagram a.)
IMPORTANT: Any light kit purchased for use with this
fan MUST be UL-APPROVED for DAMP LOCATIONS
or OUTDOOR USE.
Locate BLACK (or BLUE) and WHITE wires in the
motor housing labeled FOR LIGHT. (Refer to
diagram a.)
Remove finial from switch housing. (Refer to
diagram b.) Remove hex nut and lock washer from
threaded rod on light kit fitter. Push wires from light
kit fitter through hole in middle of switch housing
and screw switch housing onto threaded rod,
followed by lock washer and hex nut that were
previously removed. Tighten hex nut over lock
washer for a secure fit. (Refer to diagram b.)
Connect WHITE wire from light kit fitter to WHITE
wire from motor housing. Connect BLACK wire from
light kit fitter to BLUE (or BLACK) wire from motor
housing. Be sure molex connections snap together
securely. Align slotted holes in switch housing with
loosened screws in fitter plate. Twist switch housing
to lock and securely tighten all 3 screws.
Attach glass shade(s) to light kit fitter using the
hardware provided with the light kit. (Refer to
diagram c.)
NOTE: If you are installing a bowl fixture, the bulb(s)
must be installed first.
Install bulb(s) specified by the light kit. (Refer to
diagram c.) If you are installing a halogen bulb, be
sure not to handle glass directly with your fingers as oil
from the skin may shorten the life of the bulb.
Important: When changing bulbs, remember to
allow bulb(s) and glass shade(s) to cool before
touching.
diagram a
lock washer
switch housing
diagram b
bulb
[representative only]
diagram c
page 10
motor
housing
black (or
blue) wire
white
wire
switch housing
switch housing
hex nut
[representative only]
glass shade
[representative only]
fitter plate
finial
light kit fitter
[representative only]
light kit fitter