Automated Learning Process./Activating Code - Craftmade Riata Grande 70 Guia De Instalacion

10. Automated Learning Process./Activating Code.

LED LIGHT
FAN OFF
FAN SPEED
REVERSE
UP LIGHT
LIGHT KIT
CODE
SWITCHES
DIMMER
Install 12-volt battery (provided) in transmitter and wall control (if applicable).
IMPORTANT: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
LED LIGHT:
FAN SPEED, Buttons 1-6:
REVERSE:
CODE SWITCHES and LEARN button: With fan power off, arrange CODE SWITCHES to desired code
UP-LIGHT:
LIGHT KIT:
DIMMER SWITCH:
FAN OFF:
ON/OFF slider switch:
Select faceplate for remote control and/or wall control and press firmly onto front of remote control/wall
control.
IMPORTANT: The Automated Learning Process takes 5 minutes to complete. Please leave the fan "on" for the duration of the 5-minute programming and do not use the remote control
during this time.
REMOTE
CONTROL
3 4
5
2
1
6
LEARN
12V
Comes on when any button is pressed.
Use to control the ceiling fan speed 1-6.
Use to control fan direction.
setting. Turn fan power on. Within 30 seconds of powering fan,
press and hold LEARN button on remote control and/or wall
control for 5 seconds (or until fan beeps twice) in order to
synchronize remotes with fan motor.
Use for up-light (if applicable).
Use for light kit (if applicable).
Dimming capability is determined by the type of bulbs provided
with the light kit.
ON position = D
Use to turn fan off.
[Wall control only] Use to turn wall control on or off.
IMPORTANT:
Remote and wall
controls must be
S NC R ONI ED with
fan in order to
properly function.
IMPORTANT:
The code switches in
remote and wall
controls MUST MATC
for fan to function
properly.
OFF position = O
page 8
WALL
CONTROL
LED LIGHT
3 4
2
1
6
CODE
SWITCHES
DIMMER
12V
FAN OFF
5
FAN SPEED
REVERSE
UP LIGHT
LIGHT KIT
ON/OFF
SLIDER
SWITCH
LEARN