Philips Lumea BRI864 Manual Del Usuario página 28

28
English
Skin type
I
4 Press the on/off button again to confirm that
you want to use the suggested setting advice to
start using the device.
Philips Lumea will automatically use the highest
suggested intensity, indicated by a continuous
green light.
Lumea gives you the freedom to select the light
intensity that you find most convenient. If you
want to set the light intensity setting manually,
please consult the table below.
Note: The device automatically disables when
your skin tone is too dark, to prevent you from
developing skin reactions. The 'ready to flash'
light will blink orange to indicate if the skin tone
is too dark.
5 Lumea should never be painful. If you
experience discomfort, reduce the light
intensity setting. You can do this by using the
on/off button.
6 After moving to another body area or recent
tanning, perform a skin test to determine the
right light intensity setting. To re-activate the
setting advice feature, turn off the device off by
pressing the on/off button for 2 seconds, and
turn the device back on by pressing the on/off
button shortly.
Note: Since body areas might differ in skin
color, you need to select the right setting for
each body area separately. The Philips Lumea
does not automatically select the correct
setting.
Skin tone
White: you always
sunburn, never tan.
Light intensity setting
4/5