Computer Connection  Output; Computer Connection; Waterlink Connect; Battery/Ac Operation - LaMotte DC1500 Manual De Instrucciones

12:00:00 001/500
AND ANOTHER
AND SO ON
: : :
: : :
LAST CHOICE
The feature called Looping Menu can be turned on and off in the Editing Menu. The
default setting is ON.

COMPUTER CONNECTION

 OUTPUT
USB
 COMPUTER CONNECTION
USB Type A, USB mini B, Order Cable Code 1720.
 WATERLINK CONNECT
The meter may be interfaced with any Windows-based 64 bit computer by using
the LaMotte WaterLink Connect program and a USB cable. The program will store
test information and results in a local database, and allow for exporting this data to
a comma separated value (CSV) fi le. The meter will send the following data: time/
date stamp, name of test, sample value, sample units, meter name, and location.
To download WaterLink go to http://softwarecenter.lamotte.com. Select "WaterLink
Connect Software for Windows FREE Download".
BATTERY
 BATTERY/AC OPERATION
The colorimeter may be operated on battery power, using a USB wall adapter or USB
computer connection. If using the meter as a bench top unit, use the wall adapter if
possible to extend the battery life. The meter will remain on when the USB adapter
is used.
To charge the battery with the wall adapter, plug the smaller end of the USB cable
(USB mini B connector) into the meter and the larger end of the USB cable (USB
Type A connector) into the wall adapter. Plug the wall adapter into an AC outlet.
Reinsert the USB port plug after charging.
To charge the battery from a computer, plug the smaller end of the USB cable (USB
mini B connector) into the meter and the larger end of the USB cable (USB Type A
connector) into a USB port on a computer.
The battery icon will show no bars and fl ash when the unit fi rst turns on. Then the
indicator will indicate the battery status by showing 0, 1, 2, 3 or 4 bars.
It will take 5 hours to fully charge a low battery. The battery icon will fl ash when the
battery is charging. The battery icon will show four bars and stop fl ashing when it is
fully charged. The charging circuit will automatically switch to a fl oat charge when
the battery is fully charged. The charger may remain connected. Some computers
will NOT supply power to their USB ports during standby operation. The wall adapter
will charge the unit continuously.
The battery icon will show no bars and continuously fl ash if the battery is getting
low but the unit will still operate normally. A "Low Battery" message on the status
bar of the display will replace the time when the battery voltage is too low for proper
operation and accuracy may be degraded. A "Shutdown Low Batt" message on the
12:00:00 001/500
FIRST CHOICE
SECOND CHOICE
THIRD CHOICE
ANOTHER
AND ANOTHER
16
12:00:00 001/500
FIRST CHOICE
SECOND CHOICE
THIRD CHOICE
ANOTHER
AND ANOTHER