CAPITAL SPORTS Helix Stride Manual De Instrucciones página 57

Step 2: Mounting the front stabilizer
The 4 Nymon nuts (87) were pre-installed
on the underside of the main frame (1).
Remove the nymon nuts (87).
Connect the lower connecting wire (68) with the middle connecting wire (67). Then
attach the front anti-roll bar (32) to the main frame (1) with the wheels up. Tighten the
4 nylon nuts (87) lightly but not completely!
Place the main frame (1) in the
polystyrene packaging as shown. This
makes it easier to install the front
stabiliser (32).
EN
57