Routine Maintenance; Model Identification - Ingersoll Rand EL 24V Serie Manual De Instrucciones

3. Check the adjustment with a torque wrench. A number of factors will affect torque output
from one job to another. Final torque adjustment should be made at the job through a series
of gradual increases. Always start below the desired torque and work upward.

Routine Maintenance

General Instructions:
Maintenance and repairs should be made only by authorized trained personnel; when such
service or repair is required for these tools, contact the nearest Ingersoll Rand Authorized
Service Center.
For Authorized Trained Personnel:
For 'Assembly / Disassembly' and other maintenance instructions regarding these products, see
Maintenance Information Manual 16575318 (EL 24V Series), located at www.ingersollrand-
products.com, or contact the nearest Ingersoll Rand Office or Distributor.
Disconnect the tool from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of starting
the tool accidentally.

Model Identification

Low Torque (Requires Controller)
* Power: 24V DC From Controller
* Cable Length: 5ft. Straight
* Sound: 57 dBa
* Reversible: Yes
Control
Electric
(Dwg. TPD 1824)
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
16578668_ed1
CAUTION
WARNING
E
04
L
Configuration
Torque
L Lever Start
(Max. Approx)
(in.-lbs) (Nm)
01
04
10
NOTICE
10
E
Speed
07 700 rpm
09 900 rpm
10 1000 rpm
0.15
0.54
1.17
EN
For Sale in
EU Community
EN-2