Samson Graphite 25 Manual Del Propietário página 18

Setup Mode
Editing the Aftertouch Control
Press the Aftertouch key to assign control code for the keyboard aftertouch feature. "A.Touch"
will appear on the display with the value of the current control in the data area. Use the DATA +/–
buttons to change the value, or enter data by pressing the numerical keys on the keyboard. Press
both DATA +/– buttons simultaneously to recover the original value. Press the ENTER key or the
ENTER button to confirm your setting and to save. When you save your settings, the value display
will stop blinking.
Selecting the Keyboard Velocity Curve
Press the KB Vel key to select a velocity curve for keyboard. "KB.Curve" will appear in the Operation
area of the display with its current velocity curve number in the data area. The Operation area will
then change to show the current velocity curve. Use the DATA +/– buttons or enter the number
by pressing the numerical keys on the keyboard to select a curve. Press the ENTER key or the
ENTER button to confirm your setting and to save. When you save your settings, the name of the
velocity curve will be updated, and the value display will stop blinking.
Available Velocity Curves
No. Type Description
0 Normal Linear type curve - Default
1 Soft 1 Results in a lower transmitted velocity (and corresponding volume)
2 Soft 2 Results in a lower transmitted velocity (and corresponding volume)
3 Hard 1 Results in a higher transmitted velocity (and corresponding volume)
4 Hard 2 Results in a higher transmitted velocity (and corresponding volume)
5 Expand Emphasizing the louder volume and softening the lower volume
6 Compress Emphasizing the softer volume and softening the louder volume
7 Fix 64 Note velocity is fixed to 64
8 Fix 100 Note velocity is fixed to 100
9 Fix 127 Note velocity is fixed to 127
0 - Normal
5 - Expand
18
1 - Soft 1
6 - Compress
2 - Soft 2 3 - Hard 1
7 - Fix 64 8 - Fix 100
4 - Hard 2
9 - Fix 127