Adjustment; Separate Choke Type; Throttle Cable Installation, Adjustment; Choke Cable Installation, Adjustment - Kawasaki FX850V Manual Del Propietário

22 ADJUSTMENT

Separate Choke Type

Throttle Cable Installation, Adjustment

●
Link the throttle cable to the speed control lever
and loosely clamp the throttle cable outer housing
with the cable clamp bolt.
●
Move the throttle lever to "FAST" position.
●
Pull up the outer housing of the throttle cable until
the inner wire has almost no slack, and tighten the
cable clamp bolt.
●
Move the throttle lever to "SLOW" position. Make
sure that the carburetor throttle valve pivot arm is
moved smoothly.

Choke Cable Installation, Adjustment

●
Link the choke cable to the choke lever, and
loosely clamp the choke cable outer housing with
the cable clamp bolt.
●
Move the equipment choke control to "OPEN"
position. Make sure that the carburetor choke
valve (pivot arm) is fully opened.
●
Pull up the outer housing of the choke cable until
the inner wire has almost no slack, and tighten the
cable clamp bolt.
ADJUSTMENT
●
Move the equipment choke control to "CHOKE"
position. Make sure that the carburetor choke
valve (pivot arm) is completely closed.
●
Make sure that the choke valve turns from fully
close position to fully open position when actuating
the equipment choke control.
A. Throttle Cable
B. Speed Control Lever
C.H. Cable Outer Housing
D.J. Cable Clamp Bolt
E
I F
B A
E. Pirot Arm
F. Choke Cable
I. Choke Lever
J
H
C
D