Acquisition Function (Datalogger) - Promax US TV EXPLORER 2 User Manual

10
FREQ:
CH:
MPEG-2 TS DVB-T
Keep the [24] key pressed in order to accede to the listing of channel plans
available in the instrument and later select the current channel plan by means of the
rotary selector [1].
The allows directly changing the tuned channel pertaining to the active
EXPLORER
channel plan by means of the horizontal
the channel-tuning field
[12] operation modes is possible to check cyclically the entire active channel list.
NOTE:
The icon
equipment is carrying out an internal operation and user must wait to
complete it.

5.10 Acquisition function (DATALOGGER)

The Datalogger function allows the user to carry out and store measurements in
a fully automatic way. It can store for each acquisition the measurements made in
different points of the installation. The measurements made are relevant to the current
analogue or digital channel, in the active channel plan.
To select the Datalogger function, activate the UTILITIES
select the RUN DATALOGGER option. Later, by turning the rotary selector [1] select a
previously stored acquisition or a NEW DATALOGGER.
Page 36
USER'S MANUAL. US TV EXPLORER II
CHANNEL SET
CCIR
FCC
OIRT
30 50 70 90 110
STDL
650.00 MHz C/N: >21.3
EXIT
-3 kHz » POWER: 55.8
43 MER: 19.5
CBER:
VBER:
Figure 11.- Channel plans listing.
cursors [6]. From this way, once selected
[24] and in the TV [10] and MEASUREMENTS
in the upper corner of the screen indicates that the
130
dB
dBµV
dB
5.0E-2
5.3E-4
[22] menu and
10/2007