Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. US TV EXPLORER II
NOTE:
In order to obtain the video signal in the original format through the Scart
connector, the 16:9 format must be selected from the Measurements
Configuration
[17] menu.
5.18
Antenna Alignment Function
It allows executing the function Antenna Alignment to align antennas using a
faster sweep without display of numerical measures. The display appears divided in two
parts, the left one shows the spectrum of the signals detected in the band and on the
right two analogue bars represents the level of signal corresponding to the tuned
frequency or channel. The left bar shows the peak value with a certain persistence. The
right bar shows a filtered average value.
100
90
80
70
60
CH:
Figure 48.- Utility for antenna alignment.
Simultaneously the instrument emits by means of the loudspeaker an acoustic
tone, which varies according to the level of received signal.
5.19
DiSEqC Command Generator
7
DiSEqC
('Digital Satellite Equipment Control') is a communication protocol
between the satellite receiver and the accessories of the installation (switches, LNBs,
etc.) proposed by Eutelsat, with the aim to standardize the diversity of switching
protocols (13 - 18 V, 22 kHz) and to satisfy the demands of the digital TV installations.
TM
7
DiSEqC
is a trademark of EUTELSAT.
10/2007
FR:
755.00
MHz
61
SPAN:
50 MHz
Page 71
Capítulos
Tabla de contenido
