Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Light Sensor
Min. Ter. Power
Min. Ter. Level
Identification DVB-S2
Min. Sat. Power
C/N
Identify Timeout
Sat Band
Auto Power Off
Time Power Off
Terrestrial Units
Satellite Units
Rotary Selector
PRN-23 BER
Exit
Page 26
USER'S MANUAL. US TV EXPLORER II
It activates a light sensor to automatically adjust the
display contrast and brightness. Options are: High
contrast (with low luminosity), Low contrast (with high
luminosity) and AUTO.
Sets the minimum power for a terrestrial digital signal to
be identified.
Sets the minimum level for a terrestrial analogue signal
to be identified.
It allows to identify the DVB-S2 satellite digital signals.
Sets the minimum power for a satellite digital signal to
be identified.
Defines the C/N measuring method between Auto or
Reference Noise (Manual), used to determine the
frequency where noise level will be measured in the
spectrum analyser mode.
Sets the maximum time that the equipment will carry
out the identification of a channel unknown before going
to the next one.
(Only satellite band).
Selects the C-band or Ku-band for tuning satellite
signals.
Activates the automatic power off mode.
Select the power off timeout between 1 and 120
minutes.
Select the measurements units for terrestrial and cable:
dBµV, dBmV or dBm.
Select the measurements units for satellite: dBµV,
dBmV or dBm.
Select the movement sense: CW (clockwise) or CCW
(counterclockwise).
Turns ON or OFF the PRN-23 BER option.
Exit from preferences menu
10/2007
Capítulos
Tabla de contenido
