Promax US TV EXPLORER 2 User Manual página 80

In order to define and/or to send a sequence of DiSEqC commands, press the
DiSEqC key [21] on frontal panel. It allows to define the satellite band configuration
parameters and select through SEND function one of the eight predefined programs
which execute basic functions to control an universal switch with two or four inputs, by
means of the rotary selector [1].
0
FREQ:
DL-Ku:
CH:
Figure 49.- DiSEqC command screen.
Whenever a DiSEqC program is sent, the commands that correspond to the
equipment status in relation to the Horizontal or Vertical polarization and High or Low
frequency band are also sent. This allows assuring that the installation status is the one
indicated by the equipment.
The COMMANDS option from DiSEqC menu allows to execute any of the
following commands:
CHARACTER
POWER
RESET
General
STANDBY
SAT A/B
SWITCH 1
SWITCH 2
Non-assigned Switch
SWITCH 3
SWITCH 4
POSITION A/B
Assigned Switch
SWITCH OPTION A/B
DISABLE LIMITS
ENABLE LIMITS
LIMIT EAST
LIMIT WEST
DRIVE EAST SEC.
DRIVE EAST STEPS
Positioner
DRIVE WEST SEC.
DRIVE WEST STEPS
GOTO POSITION
HALT
STORE POSITION
RECALCULATE
Table 5.- Available DiSEqC commands.
Page 72
USER'S MANUAL. US TV EXPLORER II
DiSEqC
» POLARIZATION HORIZ/LEFT
» SAT BAND HIGH
» SEND POSITION A/B A
20 40 60 80 100
COMMANDS
1300.02 MHz » LEVEL: 30.0
SATCR
11900.0 MHz C/N:
EXIT
2
COMMAND ASSOCIATED PARAMETER
120
dBµV
7.6 dB
---
---
---
A / B
A / B
A / B
A / B
A / B
A / B
A / B
---
---
---
---
1 to 127
1 to 127
1 to 127
1 to 127
1 to 255
---
1 to 255
1 to 255
10/2007