Tabla de contenido
Idiomas disponibles
Idiomas disponibles
0
FREQ:
DL-Ku:
CH:
When activating the Enable Pilots option, the SatCR device located in the
headend emits a pilot signal with constant level for each down frequency (slot). This
function facilitates the verification and identification for different satellite channels that
are available in the installation. The SatCR technology is being developed and tested in
many countries.
5.21
Using the alphanumeric keyboard
In order to enter numerical data or text the built in alphanumeric keyboard must
be used. Many keys incorporate a number and several letters like the telephone
keypad.
1)
Entering numerical data: (e.g.: a channel frequency).
Press the key corresponding to the digit that you wish to enter (from the 0 to
the 9). When pressing the decimal point key
point and later the equipment allows entering two more digits. In order to
introduce a negative number first press the key
appears.
In order to erase a digit move with the cursor horizontal arrow keys
placing the cursor behind the digit that is desired to erase and next keep
key [17] pressed until the digit disappears. Repeat the operation by
each additional digit you wish to eliminate.
Page 74
USER'S MANUAL. US TV EXPLORER II
SATCR
DiSEqC
» SELECTED SLOT:
» NUMBER OF SLOTS:
20
40
60
80
100
» ADDRESS:
1300.02
MHz
» LEVEL:
30.0
1 MHz
» STEP:
11900.0
MHz
C/N:
» ENABLE PILOTS:
2
950.05 MHz
» SLOT 1:
1419.96 MHz
» SLOT 2:
EXIT
Figure 51- SatCR command screen.
1
2
120
0
dBµV
7.6
dB
OFF
[17] it enters the character
[24] until the sign -
10/2007
[6]
Capítulos
Tabla de contenido
