Menu Level 3: Operating Mode; Menu Level 4: Default Setting - Waeco CoolAir CA850S Instrucciones De Instalación

CA-850S_EBA.book Seite 36 Freitag, 16. April 2010 6:46 18
CoolAir
6.3.4

Menu level 3: Operating mode

The unit always starts with a defined operating mode for room tempera-
ture. This parameter can be configured:
➤ Start configuration mode (see Chapter "Starting and ending configu-
ration mode" on page 33).
✓ The first digit of the display (fig. 8 on page 6, item 5) shows the menu
level and the second and third show the parameter which can be set.
➤ Press the + button (fig. 8 on page 6, item 6) twice to switch to menu
level 3.
➤ Press the Operating Mode button (fig. 8 on page 6, item 4) to
change the parameters.
✓ The digits in the display flash until the parameter you entered is con-
firmed.
➤ Use the + and – buttons (fig. 8 on page 6, item 6 and 7) to set the
mode with which the unit starts up:
Characteristic fig-
ure
0
1
2
3
➤ Press the Operating Mode button (fig. 8 on page 6, item 4) to con-
firm your entry.
✓ The set value is saved and is then used when the unit is restarted.
✓ You are now in menu level 3 again and can use the + and – buttons to
switch between menu levels.
6.3.5

Menu level 4: Default setting

You can reset the parameters you set in configuration mode on menu
levels 1 to 3 to the default settings:
➤ Start configuration mode (see Chapter "Starting and ending configu-
ration mode" on page 33).
✓ The first digit of the display (fig. 8 on page 6, item 5) shows the menu
level and the second and third show the parameter which can be set.
➤ Press the + button (fig. 8 on page 6, item 6) three times to switch to
menu level 4.
✓ The digital display shows
➤ Press the Operating Mode button(fig. 8 on page 6, item 4), to reset
the unit to the factory settings.
36
Operating mode
Automatic mode
Operating mode 1
Operating mode 2
Operating mode 3
.
--
Installation