Important! Before You Start Mowing - Murray ELT155420H Manual Del Operador

How To Install The Battery Cables (Figure 7)
WARNING: To prevent sparks, fasten the
red cable to the positive (+) ter minal before
you connect the black cable.
1. Remove the protective cap from the battery terminal.
2. Slide the terminal cover (B) onto the red cable
(E). Fasten the red cable (E) to the positive (+)
terminal (D) with the fasteners (F) and (G).
3. Fasten the black cable (H) to the negative (-)
terminal with the fasteners (F) and (G).

Important! Before You Start Mowing

• Check the engine oil.
• Fill the fuel tank with petrol.
• Check the air pressure of the tires.
• Check the level of the mower hous ing.
• Attach the battery cables.
8
Check Tire Pressure
Check the air pressure in the tires. Tires with too much air
pressure will cause the unit to ride rough. Also, the wrong
air pressure will keep the mower housing from cutting level.
The correct air pressure is: Front Tires 0,97 BAR (14 PSI),
Rear Tires 0,69 BAR (10 PSI). The tires were over-inflated
for shipment.
How To Prepare The Engine
NOTE: The engine was shipped from the fac tory filled with
oil. Check the level of the oil. Add oil as needed.
See the engine manufacturer's instructions for the type
of petrol and oil to use. Before you use the unit, read the
information on safety, oper ation, maintenance, and storage.
WARNING: Follow the engine manu-
facturer's instructions for the type of petrol
and oil to use. Always use a safety petrol
container. Do not smoke when adding
petrol to the engine. When inside an
enclosure, do not fill with petrol. Before you
add petrol, stop the engine. Let the engine
cool for several minutes.
murray.com