Troubleshooting; Parts; Replacement Parts - Oreck HEPA Manual Del Usuario

Trouble-
shooting
Service problems that
appear to be major can
often be solved easily.
You can be your own
troubleshooter by
reviewing this guide.
All other servicing
should be done by an
Oreck authorized
service center.

Parts

E
Problem
Cleaner will not run.
Cleaner does not
pick up.
Unit still does not
operate properly.
All replacement parts are sold separately. To order, call our customer service group or visit
our website. Please have your model number from the data label on the bottom of the unit.

Replacement Parts

Item
Belts, 3 Pack
Odor Fighting HEPA Inner Bag, 8 Pack
Customer Service Hotline
USA: 1-800-989-3535 Canada: 1-888-676-7325
website: www.oreck.com
8
N G L I S H
Check
• Not plugged in properly.
• No electricity in wall
outlet.
• Filter Bag is full.
• Nozzle or intake
pivot clogged.
• Belt is broken or
stretched.
• Brush is worn.
• Bag tube clogged.
• Bag pores are clogged
with fine dust.
• Impeller fan is broken
• Check all the above
points.
What to do
• Be sure cleaner is firmly plugged into
wall outlet.
• Check electrical source – fuse or circuit
breaker.
• Replace filter bag. See "Replacing
Disposable Odor Fighting HEPA
Inner Bag".
• Clear obstruction.
• Replace belt.
• See "Replacing Brushroll".
• Clear obstruction.
• Change bag.
• Return to Service Center for repair.
• Contact Oreck for service.
0300604
CCPK8OH
Part Number
Part Number
Part Number