Troubleshooting - Oreck clean home Edge Serie Guia Del Usuario

Trouble-
shooting
16
All manuals and user guides at all-guides.com
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this
guide. All other servicing should be done by an Oreck
authorized service center.
Problem
Cleaner will • Not plugged in
not run
• No electricity in
• Brushroll is
Cleaner does • Filter Bag is full.
not pick up.
• Nozzle or intake
• Brush is worn.
• Bag tube
• Bag pores are
• Impeller fan is
• Revolving brush
Unit still does Check all the above
not operate points.
properly.
Check
• Be sure cleaner is
properly.
wall outlet. • Check electrical
jammed and
motor shut off. • Upright can be
• Replace filter bag.
pivot clogged.
• Clear obstruction.
clogged.
• Change bag.
• Return to Service
clogged with
fine dust.
broken
is not even at
both ends.
Contact Oreck for
service.
Solution
firmly plugged
into wall outlet.
source – fuse or
circuit breaker.
"reset" by unplug-
ging or pressing
ON/OFF button
once.
See Replacing
Disposable Odor
Fighting Dust
Bag.
Center for repair.