Kohler K-682 Guia De Instalacion página 12

30' (9.14 m) 4-Pin Interface Cable
Primary Interface
(Inside Shower)
Connector
Drip Loop
30' (9.14 m) 8-Pin Interface Cable
7. Preparation
If not already installed, install the digital valve at this time according to the instructions packed
with the product.
NOTE: The optional auxillary interface, with the 4-pin cable, is located outside the showering enclosure,
while the primary interface, with the 8-pin cable, is located inside the showering enclosure.
Determine all required components along with their installation locations before beginning this
installation.
Custom showering experiences other than the preprogrammed options must be programmed into
the interface prior to use. Refer to the "Digital Interface Homeowners Guide."
The numbers marked at each valve inlet must correspond to the appropriate showering component
for the preprogrammed or custom showering experiences to function properly. Keep this in mind
when determining your component layout routing the piping.
1043183-2-B
Drip Loop
Drip Loops
12
Auxiliary Interface
(Outside Shower)
Power Supply
Outlet
Drip Loop
Kohler Co.