Returns - ABB FV4000-VT4 Manual Del Usario

Caution!
Never loosen the tower's retaining bolts.
Never remove the converter from the tower.
This could result in damage of the flowmeter.
If you experience any problems, contact ABB service
•
•
•
2.1.15
If you wish to send the equipment to the ABB parent company in Göttingen for repairs or re-calibration,
use the original packaging or a suitable secure transport container. Please specify the reason for return-
ing the equipment.
Note! Hazardous substances as defined in EU directive
Anyone in possession of special-category waste is responsible for its disposal and/or must note the fol-
lowing rulings if transporting such waste:
•
•
Note!
This operating instruction contains instructions regarding start-up and inspections as well as the specifi-
cations for the instrument version. The manufacturer reserves the right to make improvements to the
hardware and/or software. You can obtain information about up-date issues and possible extensions from
the parent company in Göttingen or from your ABB sales office.
14 Vortex-/Swirl-Flowmeter
Before removing the equipment, check whether hazardous
substances were used as the flow medium. There may be
hazardous residue in the equipment and this may escape
upon opening.
If piping vibrations are present, we recommend securing
the flange bolts and nuts to prevent them from loosening.
Included in the responsibilities of the system operator are
periodic inspections to check:
– the function
– the seal integrity
– the wear level (corrosion, abrasion, cavitation)

Returns

All flowmeters and/or converters delivered to ABB Automation Products for repairs must not contain
any traces of hazardous substances (acids, lyes, solvents, etc.). In order to ensure this, the hazard-
ous substances should be rinsed out of all cavities, e.g. between measurement pipe and housing
and neutralized. These procedures should be confirmed in writing in the accompanying papers.
If the person responsible for these hazardous substances is not able to completely remove them, the
equipment should be returned with the necessary accompanying papers. The owner of the equip-
ment will be invoiced for any costs which ABB may incur through the disposal of hazardous sub-
stances during repairs.
2 English
Converter
Tower
Retaining bolts
D184B123U02