Description - koban KPA 02 Manual Del Usuario

KPA 02
Digital clamp meter
Maintenance
• Don't try to open the meter bottom case to adjust or repair. Such
operations only can be operated by technicians who fully understand the
meter and electrical shock hazard.
• Before opening the meter bottom case or battery cover, it should remove
probe from the circuit to be measured.
• To avoid incorrect readings and possibly causing electric shock, when
appears on the meter display, replace the battery immediately.
• Clean the meter with damp cloth and mild detergent. Do not use abrasives
or solvents.
• Power off the meter when the meter is not used. Switch the measuring
range to OFF position.
• If the meter is not used for long time, remove the battery to prevent
damage to the meter.

Description

• The meter is a portable, professional measuring instrument with LCD
display and back light for easy reading by users. Measuring range switch
is operated by one hand for ease of operation. The meter has overload
protection and low battery indicator. It is an ideal multifunction meter no
matter for professionals, factories, schools, fans or family use.
• The meter is used to measure AC current, DC current, voltage, DC voltage,
frequency, duty ratio, resistance, capacitance measurement, temperature,
NCV and circuit connection, and to make diode tests.
• The meter has an auto measuring range function.
• The meter has a test data dual display function.
• The meter has a reading hold function.
• The meter has a relative test function.
• The meter has max. and min. display function.
• The meter has a manual measuring range selection function.
• The meter has a back light function.
• The meter has a auto power-off function.
Instructions manual | 22 www.grupotemper.com