Switching The Appliance On - Hilti DD-WMS 100 Manual De Instrucciones

5.2 Fitting the filter bag
A filter must be fitted for the Vacuum cleaner and Recycling modes.
1. Open the two catches.
2. Lift the top section of the appliance away from the water and waste material container.
3. Attach the filter to the filter holder.
4. Fit the top section of the appliance onto the waste material container.
5. Close the two catches.
5.3 Connecting the hose set to the diamond coring machine
1. Connect the suction hose to the suction hose inlet fitting.
2. Connect the water supply hose to the water supply hose outlet fitting.
3. Connect the other end of the suction hose to the water collector of the diamond core drilling machine.
Use the tapered adapter if necessary.
4. Connect the other end of the water supply hose to the diamond core drilling machine.
6 Operation
6.1

Switching the appliance on

WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance tasks.
WARNING
Risk of hazards through use of the product not as directed.
▶ This appliance is not suitable for picking up hazardous dust.
CAUTION
Risk of injury through incorrect operation.
▶ The appliance may be operated only by authorized, trained personnel. This personnel must be specially
informed of any possible hazards.
CAUTION
Risk of hazards through use of the product not as directed.
▶ Use the power outlet on the appliance only for the purposes described in these operating instructions.
CAUTION
Risk of damage to the equipment or other property! Incorrect operation may lead to damage to the tool.
▶ Switch the product off immediately if foam or liquid escapes from it.
1. Connect the hose set to the diamond coring machine. → page 21
2. Set the control switch to the desired operating mode.
*2154323*
3
2154323
4
English 21