Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Keep body stance balanced and firm. Do not
overreach when operating this tool. Anticipate
and be alert for sudden changes in motion, reac-
tion torques, or forces during start up and oper-
ation.
•
Tool and/or accessories may briefly continue
their motion after throttle is released.
•
To avoid accidental starting - ensure tool is in
"off" position before applying air pressure,
avoid throttle when carrying, and release throt-
tle with loss of air.
•
Ensure work pieces are secure. Use clamps or
vises to hold work piece whenever possible.
•
Do not carry or drag the tool by the hose.
•
Do not use power tools when tired, or under the
influence of medication, drugs, or alcohol.
•
Never use a damaged or malfunctioning tool or
accessory.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool perfor-
mance, and increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized Ser-
vicenter.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
Ingersoll-Rand No. 10
Always use an air line lubricator with these tools.
We recommend the following Filter-Regulator-Lubri-
cator (FRL) Unit:
Using the Tool (Continued)
NOTICE
WARNING SYMBOL IDENTIFICATION
Read this manual before
operating tool.
AGENCY SYMBOL IDENTIFICATION
European Community Mark
Indicates compliance with
relevant CE directives.
LUBRICATION
Ingersoll-Rand No. 28
•
Do not modify the tool, safety devices, or acces-
sories.
•
Do not use this tool for purposes other than
those recommended.
•
Use accessories recommended by Ingersoll-
Rand.
•
Do not use dull or damaged blades. When
replacing blades make sure they are correctly
and securely mounted.
•
Anticipate the unexpected tool movement due to
a breaking or binding blade. Release the trigger
immediately if this occurs.
•
When a suspension device is used, ensure that it
is securely fastened.
•
Beware of ejection of cuttings or chips.
WARNING
Inside USA use FRL unit #C28-04-FKG0-28
Outside USA use FRL unit #C28-C4-FKG0
After each two hours of operation, unless an air line
lubricator is used, inject 1/2 cc of Ingersoll-Rand No.
10 Oil into (2) before attaching the hose.
Periodically, inject several drops of Ingersoll-Rand
No. 10 Oil around the blade pivot point.
2
WARNING
Always wear hearing
protection when operating
this tool.
Tabla de contenido
