Warning Symbol Identification; Using The Power Management System; Power Management System - Ingersoll Rand S 2131A Instrucciones

WARNING
Always wear eye protection
when operating or
performing maintenance
on this tool.

USING THE POWER MANAGEMENT SYSTEM

Air wrenches are not torque control devices. Fasteners
with specific torque requirements must be checked
with suitable torque measuring devices after
installation with an air wrench.
POWER
MANAGEMENT SYSTEM
POWER SETTING INDICATORS
MINIMUM

WARNING SYMBOL IDENTIFICATION

Read this manual before
operating tool.
MAXIMUM
POWER
MANAGEMENT
DIAL
(Dwg. TPD1339)
WARNING
The 2131 series of Impact Wrenches incorporate a Power
Management System that allows the operator to select four
power output settings. These settings range from
minimum power output through maximum power output
in the forward direction only. The Air Wrench will always
operate at maximum power output in the reverse direction,
no matter what power output level is selected.
The four power setting indicators of increasing size on
the rear of the housing indicate increasing power
output levels, are for reference only and DO NOT
denote a specific power output. The smallest power
setting indicator designates minimum power output,
the two middle power setting indicators denote medium
power outputs and the largest power setting indicator
denotes maximum power output.
The power output can be further reduced in forward
or reverse by using the variable throttle. Air supply
systems which do not deliver adequate air pressure can
affect power output at all settings.
2
WARNING
Always wear hearing
protection when operating
this tool.