Attas GAMMA 60 Manual Del Usario página 124

for the incorporation of partly completed machinery in accordance with the EG Machinery Directive 2006/42/EG,
Annex II part 1 B.
BERNAL Torantriebe GmbH
Industriepark Sandwiesen
DE - 72793 Pfullingen - Germany
hereby declares that the garage door operators with radio remote control
GAMMA 60/GAMMA 80
that it places on the market conform to the following Directives and are intended for incorporation in a door system:
- EG Electromagnetic Compatibility Directive 2004/108/EG
- EG Low Voltage Directive 2006/95/EG- EG Construction Products Directive 89/106/EWC
- EG RoHS Directive 2002/95/EG- EG R&TTE Directive 1999/5/EG
- EG Machinery Directive 2006/42/EG with the following essential health and safety requirements: 1.1.2; 1.1.3;
1.1.5; 1.2.1; 1.2.2; 1.2.3; 1.2.4; 1.2.6; 1.3.2; 1.3.3; 1.3.4; 1.3.7: 1.5.1; 1.5.2; 1.5.4; 1.5.6; 1.5.8; 1.5.9; 1.5.10;
1.5.11; 1.6.1; 1.6.2; 1.6.3; 1.6.4; 1.7.1; 1.7.2; 1.7.3; 1.7.4
Applied standards:
EN 55014-1
EN 61000-3-2
EN 60204-1
EN 13849-1 Cat. 2 / PL "c" - safety and reliability of control systems
The relevant technical documentation was compiled in accordance with Annex VII B of the EG Machinery Directive
2006/42/EG. We undertake to transmit this documentation to the market surveillance authorities in electronic form
within an appropriate time on reasoned request.
The partly completed machinery may not be put into service until it has been determined that the door system in which
the partly completed machinery is to be installed complies with the provisions of the Machinery Directive 2006/42/EG.
Pfullingen, 01/06/2012 Willi Prettl
General Manager
The party authorised to compile the technical documentation is:
BERNAL Torantriebe GmbH - Industriepark Sandwiesen
DE - 72793 Pfullingen - Tel.: +49 (0)7121 707-0 - www.bernal.de
GAMMA 60 / 80
EG Declaration of Incorporation
EN 55014-2 - Cat. IV
EN 61000-3-3
EN 12445
EN English
EN 60335-1
EN 61000-6-2
EN 12453
Version 1.0
EN 60335-2-95
EN 61000-6-3
123 / 147