Yakima Raptor aero Guia De Inicio Rapido página 3

Round oR squaRe baRs: Install the snaparounds.
—do not inStall Universal MightyMounts on round or square bars!
square bars onlY :
Loosen the tabs by
bending them repeatedly.
JaW assemblY (Round, square, or factory crossbars)
Install
Red knob
• Place the GUIDE PLUG into the
hole on one side of the jaws.
• Slide the red knob's bolt threads
through the guide plug.
guide Plug
Tighten knob completely until
threaded end is exposed.
SKS Lock Cores are optional.
®
to install SkS® lock cores, refer to lock
instructions.
1033402A-3/18
Remove the tabs with
scissors or pliers.
• Choose access from
passenger or driver side.
• Red knob should face you
when the Raptor Aero is
attached to wheel tray.
thReAded
Slide the "E"clip into groove on end.
A coin or a key may
provide added leverage.
round and square bars :
thReAded
Plug
• Insert the Threaded Plug into
the other hole.
• Place spring between guide
plug and threaded plug.
• Slide knob through spring
and into threaded plug.
Plug
SPRing
Attach 2 SnapArounds
on the front crossbar,
and 1 on the rear
crossbar.
guide
jAwS Plug
Red knob
turn the red knob
clockwise to engage
the threaded plug.
Open red knob
completely.
note: if not using lock,
leave plug in place.