McQuay SLC Serie Manual De Instalación página 8

Figure B
Please ensure that the following steps are taken:
• Check the gradient for drainage flow as recommended
in Figure B.
• Provide clearance for easy servicing and optimal air flow
as shown in Figure C.
Figure C
Min 400.0mm (15.75)
Min 300.0mm (11.81)
Ceiling Type
Floor Standing Type
• The indoor unit must be installed such that there is no
short circuit of the cool discharge air with the warm
return air.
• Do not install the indoor unit where there is direct
sunlight shining on the unit. The location should be
suitable for piping and drainage installation. The unit
must be a large distance away from the door.
Utensils, Furnitures Or Built-In
Architectural Features Must Not
Protrude More Than 250.0mm
1-4
Min 10.0mm
(0.39)
Max 250.0mm (9.84)
Min 1.0mm (0.04)