Technical Specifications; Key To Symbols; Simplified Eu Declaration Of Conformity - Urmet VMODO 1719 Serie Manual De Instalacion Y Uso

BUTTON FUNCTION
FUNCTIONS
Function 1*
Function 2
Function 3
Function 4
* Default configuration
To changing the function of a button:
1 - Briefly press any button on the video door phone (Yokis Configuration Menu) 10 times. The video door
phone LED will blink rapidly.
2 - While the LED is blinking, press the chosen button from 1 to 4 and select the desired function: from 1
to 4, see above.
3 - The LED will blink from 1 (or 4) times to confirm calibration.
Restoring a video door phone Yokis Button to default settings
Default setting = delete button connections, return to function 1 (bistable), return to direct mode.
1 - Briefly press either Yokis button (Yokis Configuration Menu) 10 times. The video door phone LED will
blink rapidly.
2 - While the LED is blinking, rapidly press the button that you want to return to default setting 15 times.
3 - After pressing 15 times, the LED will blink 5 times to confirm.
Complete restore of the two video door phone Yokis buttons to default settings
1 - Briefly press either Yokis button (Yokis Configuration Menu) 10 times. The video door phone LED will
blink rapidly.
2 - While the LED is flashing, press either of the two Yokis buttons 25 times.
3 - After pressing 25 times, the LED will flash to confirm that default settings have been restored.
For more information and detailed configurations, consult the documentation on the two-button remote
controls on the www.yokis.com website.

TECHNICAL SPECIFICATIONS

Power voltage: ............................................................................................................................... 36 ÷ 48 V
Consumption: .................................................................................................................................... @ 48 Vcc
Standby: .................................................................................................................................... < 3,5 mAcc
Full rate: ................................................................................................................................... < 245 mAcc
Dimensions (WxHxD) ..................................................................................................... 202 x 142 x 23,5 mm
Wires with cross-section area of 0.5 mm
crosssection area smaller than 0.5 mm

KEY TO SYMBOLS

Symbol

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, URMET S.p.A. declares that the radio equipment type:
2 VOICE VIDEO 7" SOFT TOUCH Ref. 1719/1
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com
DS1719-001A
MTR2000ER
Power on / off
-
On
Off
2
must comply with IEC 60332-2-2.
2
Direct input voltage
See the installation manual of the device
MTV500ER
Change / off
Memory on
On
Off
or larger must comply with IEC 60332-1-2; wires with
Description
MVR500ER
Up / stop / down
Intermediate position
Up / Stop
Down / Stop
19