Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Manual driving
Using the cleaning time button
Operating the docking station
Use the arrow buttons above and below and to the left and right of the
start/stop button on the remote control to navigate the robot through the
room.
Note: Be careful when you drive the robot manually close to height
differences and staircases.
Note: The vacuuming function and the side brushes only work when the
robot is driven forward. The left, right or back buttons are only for
maneuvering the robot.
- Press the maximum cleaning time button to make the robot clean in auto
cleaning mode until its rechargeable battery runs low. When the robot
has finished cleaning, it returns to the docking station automatically if it
started from the docking station. If the robot started from another point in
the room, press the docking button to send it back to the docking station.
- The other cleaning time buttons allow you to let the robot operate for
and
minutes respectively. When the cleaning time is finished, the
robot automatically returns to the docking station when it started from
the docking station. If the robot started from another point in the room,
press the docking button to send it back to the docking station.
Setting clock time and day
If you want to use cleaning programs, you have to set the clock time and the
day of the week on the display of the docking station first.
Note: For the pictures that belong to the steps below, see the pages at the
back of this manual.
Press the set button. The set mode indicator and the clock time indicator
start flashing.
Press the select button once. The hour indication starts flashing.
Use the + and - buttons on the docking station to set the hour.The set
hour appears on the display.
Press the select button to confirm the hour set. The minutes indication
starts flashing.
Use the + and - buttons on the docking station to set the minutes. The set
minutes appear on the display.
,
Tabla de contenido
Solución de problemas
