Programming Cleaning Times; Fan Speed Buttons - Philips FC8820 Manual Del Usaurio

Program
Cleaning every day
Cleaning on weekdays
Cleaning on consecutive days
Cleaning day a week
Press the select button to confirm the minutes set. The indication 'Su for
Sunday starts flashing.
Use the + and - buttons on the docking station to set the current day of
the week.
Press the select button to confirm the day of the week.
Press the set button to confirm the clock time and day of the week
setting. Both the set mode indicator and the clock time indicator stop
flashing and turn solid.

Programming cleaning times

If you have set the time and the day of the week on the display of the
docking station, you can program cleaning times for your robot.
Note: For the pictures that belong to the steps below, see the pages at the
back of this manual.
The programming options available are:
Indications on display
All day indications are on
Mo to Fri indications are on
Indications of
Indication of selected day is on
Press the set button. The set mode indicator and the cleaning program
indicator start flashing.
Press the select button once. The hour indication starts flashing.
Use the + and - buttons on the docking station to set the hour. The set
hour appears on the display.
Press the select button to confirm the hour set. The minutes indication
starts flashing.
Use the + and - buttons on the docking stationl to set the minutes. The
set minutes appear on the display.
Press the select button to confirm the minutes set. The indication Su for
Sunday starts flashing.
Use the + and - buttons on the docking station to toggle between
cleaning programs see the table above for the programming options
available .
Press the select button to confirm the program selected.
Press the set button to confirm the programming. Both the set mode
indicator and the cleaning program indicator stop flashing and turn solid.
When you have set a cleaning program, the display shows the cleaning
program indicator and the day or days selected. If you leave the robot on
standby and its rechargeable battery is fully charged, it will start cleaning
at the programmed time on the programmed day or days.

Fan speed buttons

You can use the fan speed buttons to increase the fan speed to turbo or to
switch off the fan. The default setting is normal fan speed.
days are on, e.g. Fri and Sa
English