Using The Robot With The Dry Wipe Attachment; Removing The Dry Wipe Attachment; Charging The Pointer - Philips FC8820 Manual Del Usaurio

2
1
Using the pointer FC88
Insert the fixation lug of the dry wipe attachment into the opening just
behind the wheel on one side of the robot and push until you hear it lock
into place with a click. Then repeat these actions on the other side.
Turn the robot and place it on the floor on its wheels with the dry wipe
attachment touching the floor.

Using the robot with the dry wipe attachment

When the dry wipe attachment is attached, you can use the robot in any
mode and on all hard floors. Do not use the dry wipe attachment on carpet
or rugs.

Removing the dry wipe attachment

Remove the dry wipe attachment as soon as you have finished wiping
the floor.
Turn the robot upside down and place it on the floor or on a table.
Push one end of the dry wipe attachment towards the wheel on the
other side of the robot to release it. Then pull the attachment off the
robot.

Charging the pointer

The pointer has a rechargeable battery that can be charged with the USB
cable supplied.
Insert the micro-USB plug into the socket in the bottom of the pointer.
Insert the USB plug into a USB charger or a USB port on your laptop.
The charging light on the pointer lights up solid. Charging takes
minutes. When the charging light goes off, the rechargeable battery is
fully charged.
English