Charging On The Docking Station; Charging Automatically During Use - Philips FC8820 Manual Del Usaurio

Charging
When you charge the rechargeable battery for the first time and when the
rechargeable battery is empty, the charging time is four hours.
Your robot can be charged in two ways:
- On the docking station, either manually or automatically during use;
- By connecting the robot directly to the mains
Note: When the rechargeable battery is fully charged, your robot can clean
for up to 100 minutes.

Charging on the docking station

1 Place the robot on the plugged-in docking station.
2 Press the power switch to switch on the robot.
3 The battery indicator on the display of the docking station and the
light in the on/off button on the robot start flashing.
Note: Because this is the first time you charge the robot, the display of the
robot shows the booting indicator.
4 When the rechargeable battery is fully charged, the battery indicator
on the display of the docking station and the light in the on/of button
on the robot stop flashing.

Charging automatically during use

1 When the robot has finished cleaning or when only 15% of the
battery power remains, it automatically returns to the docking
station to recharge. When the robot returns to the docking station,
the light in the on/off button flashes.
2 When the robot is positioned correctly on the docking station,
the battery indicator on the display of the docking station starts to flash.
ENGLISH
11