Preparing For Use; Installing The Docking Station - Philips FC8932 Manual Del Usaurio

English
10

Preparing for use

Installing the docking station

2
1
1 0 0
c m
3 0
c m
1 Pull the battery protection tag out of the battery compartment of the
remote control. Now the remote control is ready for use.
1 Insert the small plug of the adapter into the socket on the docking station
(1) and insert the adapter into the wall socket (2).
-
The display of the docking station comes on.
2 Place the docking station on a horizontal, level floor against the wall.
Note: Make sure that there are no obstacles or height differences 80 cm
in front, 30 cm to the right and 100 cm to the left of the docking station.
Tip: To ensure the docking station stays firmly in the selected spot, fasten
it to the wall with screws or with two strips of double-sided tape.