Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6
PREPARING FOR INSTALLATION
DIMENSIONS AND CLEARANCES
NOTE
Save for the use of the local electrical inspector.
For installation in CANADA, a Free-standing range is
not to be installed closer than
adjacent surface.
CAUTION
• The wall covering, countertop and cabinets
around the range must be able to withstand the
heat (up to 194°F) generated by the range.
− Discoloration, delamination or melting may
occur.
− This range has been designed to comply
with the maximum allowable wood cabinet
temperatures of 194°F.
A = 30" (76.2 cm) For U.S.A
= 30" to 31" (76.2 to 78.7 cm) For CANADA
MINIMUM DIMENSIONS (Figure 2)
* 30" (76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or
metal cabinet; or 24" (60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less than
cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015" (0.381 mm) stainless steel, 0.024"
(0.610 mm) aluminum or 0.020" (0.508 mm) copper.
** 15" (38.1 cm) minimum between countertop and adjacent cabinet bottom.
/
" (12mm) from any
15
32
Cabinet
opening
Cabinet
6"
6"
(15.2cm)
(15.2cm)
4"
(10cm)
(10cm)
FIGURE 1
WARNING
• Use two or more people to move and install range.
(Excessive Weight Hazard)
– Failure to do so can result in back injury or other
injury.
• Do not use the oven handles to push, pull, or move
the range.
− Doing so can result in serious damage to the door
of the range.
CAUTION
• Avoid installing cabinets directly over the range.
• If cabinets are installed over the range, install a
range hood that projects horizontally a minimum
of 5 inches beyond the bottom of the cabinets.
− Doing so will reduce the risk of burns or fire
caused by reaching above the heated surface
elements.
Normal
countertop
depth
Countertop
height
Wall
Center
2.5"(6.3cm)
2.5"(6.3cm)
5"
6"
(13cm)
(15.2cm)
2.5"
4"
(6.3cm)
FIGURE 2
1
/
" (6.4
4
Tabla de contenido
