Replacing The Battery; Battery Installation - koban KMD-13 Instrucciones Operativas

REPLACING THE BATTERY

WARNING: To avoid electric shock, disconnect the test
leads from any source of voltage before removing the
battery door.
1. When the batteries become exhausted or drop below
the operating voltage, "BAT" will appear in the right-hand
side of the LCD display. The battery should be replaced.
2. Follow instructions for installing battery. See the Battery
Installation section of this manual.
3. Dispose of the old battery properly.
WARNING: To avoid electric shock, do not operate your
meter until the battery door is in place and fastened
securely.

BATTERY INSTALLATION

WARNING: To avoid electric shock, disconnect the test
leads from any source of voltage before removing the
battery door.
1. Disconnect the test leads from the meter.
2. Open the battery door by loosening the screw using a
Phillips head screwdriver.
www.grupotemper.com
AUTORANGING MULTIMETER
KMD-13
27