Introduction To Your New; Vegetable Preparation Machine; Switching On The Machine; Assembly - Robot Coupe CL 50 E Manual De Usuario

INTRODUCTION TO YOUR
NEW CL 50 • CL 50 Ultra
"E" Version VEGETABLE
PREPARATION MACHINE
The CL 50/CL 50 Ultra is perfectly geared to
professional needs. It can perform any number
of tasks, which you will gradually discover as you
use it.
This model is equipped with a metal bowl, a
stainless steel motor base for CL 50 Ultra and
polycarbonate bowl for CL 50.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning can
be fitted and removed in a trice.
This manual contains impor tant information
designed to help the user get the most out of this

vegetable preparation machine.

We therefore recommend that you read it carefully
before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
SWITCHING ON
THE MACHINE
All users should read the manual before operating
the machine.
Before connecting, check that your power supply
corresponds to that indicated on the machine's
identification plate.
6
1) With the motor base
facing you, place the
discharge plate on the
bottom of the bowl.
Emptying arm for fine grating and
slicing only (cabbage, celer y,
carrots, cheese, etc.).
SIDE A facing upwards (ejection rib
downwards) for any vegetables or
citrus fruit which require careful
handling (tomatoes, mushrooms...).
SIDE B facing upwards (ejection rib
upwards) for all other types of fruit
or vegetables.
2) Position your chosen disc:
a) If you have opted for
a slicing, grating or
julienne disc:
Position the disc on the
motor shaft. To ensure
that
positioned, turn it in a
clockwise direction.
b) You have chosen a dicing unit:
i.e. a grid and a special slicing disc for diced
vegetables.

ASSEMBLY

Slicing discs and dicing grids can be mounted in
the following combinations:
dicing grid
slicer
5 mm
8 mm
10 mm
14 mm
20 mm
25 mm
The combinations in the shaded areas can be
supplied on request.
Place the dicing grid in
the bowl of the vegetable
processor.
Make sure that the spur
on the grid is fully enga-
ged in the locking slot of
the motor base.
it is correctly
5x5 8x8 10x10 14x14 20x20 25x25
mm mm mm mm mm
•
•
•
•
•
•
Next, fit the corresponding
slicing disc (straight-
edged blade) and rotate
in a clockwise direction
to ensure that it is
correctly positioned.
mm