Introduction To Your New Emulsifier-Mixer Blixer; Switching On The Machine; Advice On Electrical Connections; Control Panel - Robot Coupe Blixer 3 D Serie Manual De Instrucciones

INTRODUCTION TO YOUR NEW
EMULSIFIER-MIXER Blixer
Blixer ® 4 • Blixer
ROBOT-COUPE has developed a new concept in
®
appliances: the Blixer
.
®
The Blixer combines the features of two well-known
appliances: the cutter and the blender-mixer.
®
The Blixer is perfectly geared to professional
needs. It can perform a number of tasks that you
will soon discover as you use it.
The Blixer ® will make it easy to prepare mixed liquid
or semi-liquid, raw or cooked meals.
The Blixer ® replaces the blender which has never
been entirely satisfactory because it cannot process
solid foods.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning can
be fitted and removed quickly.
To make things easier for you, this manual gives a
breakdown of all the various assembly operations.
This manual contains important information designed
to help the user get the most out of the emulsifier-
®
mixer Blixer .
We therefore recommend that you read it carefully
before using your machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTION
Before plugging in, make sure your power supply
corresponds to that indicated on the machine's
serial number plate.
6
®
3 •
This appliance must be plugged into an
® 4 V.
grounded socket (risk of electrocution).
Your Blixer
a single phase motor.
It comes with a power supply cord which plugs into
a standard 120V/60Hz, 15 Amp grounded power
outlet.

• CONTROL PANEL

Red knob
Green knob
Black knob
®
Blixer 3 • Blixer
®
Blixer 4 V. : Variable speed : 300 to 3600 Rpm
1) With the motor base
facing you, place the
bowl onto the motor
base with the handle to-
ward the front. Turn the
bowl just off-center and
to the left as you lower it
onto the base.
W A R N I N G
® ® ®
3 • Blixer 4 • Blixer 4 V. is fitted with
= "Off" switch.
= "On" switch.
= "Pulse" control.
®
4 : 1 speed 3450 rpm.

ASSEMBLY

2) Then, turn the bowl
back to the right (coun-
terclockwise) locking it
onto the motor base
tabs.
3) Place the blade
assembly onto the motor
shaft. Rotate the blade
assembly until it drops
into place. The bottom
blade should be level
with and just of f the
bottom of the bowl.
4) Press the button on the
wiper handle and insert
the wiper shaft through
the underside of the lid
and into the wiper
handle. Then, release the
button on the handle.
It may be necessary to
rotate the parts in order
to align the shaft and
handle. Pull on the wiper
to make sure it is locked
with the handle.
5) Locate the down-
ward-facing tab on the
bowl lid. Place the lid
on the bowl with the tab
over the bowl handle,
then lock the bowl
clamps over the lid.