Failure to follow all instructions
listed below may result in
hazardous radiation exposure, electric
shock, fire and/or serious injury.
Keep the laser receiver away
from cardiac pacemakers. The
magnet plate 7b generates a
field that can impair the
f u n c t i o n
pacemakers.
• K e e p t h e l a s e r r e c e i v e r a w a y
from magnetic data medium and
magnetically sensitive equipment. The
effect of the magnet plate 7b can lead
to irreversible data loss.
• Have the laser receiver repaired only
through qualified specialists using
original spare parts. This ensures
that the safety of the laser receiver is
maintained.
The laser receiver is intended for swift finding of rotating laser beams in the wavelength listed
in the "Technical Data".
The laser receiver is suitable for indoor and outdoor use.
Inserting/Replacing the Battery
Alkaline batteries are recommended for the
laser receiver.
Pull the latch 16b of battery lid outward and
open the battery lid 15b.
When inserting batteries, pay attention to the
correct polarity according to the representa-
tion on the inside of the battery compart-
ment.
GRL800_900_1000 10-18.indd 28
LR10 General Safety Rules
R e a d
a l l
instructions.
o f
c a r d i a c
LR10 Intended Use
LR10 Preparation
-28-
• Do not operate the laser receiver in
explosive environments, such as in the
presence of flammable liquids, gases
or dusts. Sparks can be created in the
laser receiver which may ignite the dust
or fumes.
• Read and strictly observe the safety
warnings in the operating instructions
of the rotational laser.
Noise Information
The A-weighted sound pressure level of the
audio signal at one meter distance is 80
dB(A).
Do not hold the tool close
to your ear.
When the battery low indicator 22b appears
for the first time on the display 6b, the laser
receiver can still be operated for approx. 2 h.
Remove the batteries
from the laser receiver
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and self-discharge.
10/4/18 7:07 AM