Binks 21 Serie Manual De Servicio

SERVICE MANUAL
BINKS MODEL 21, 21V, & 21M
AUTOMATIC SPRAY GUN
The following instructions provide the necessary
information for the proper operation and preventive
maintenance of the Binks Model 21 Automatic Spray
Gun. Please read and understand all information in this
document in order to get the maximum performance from
your new Model 21 spray gun.
The Model 21 Series of spray guns are heavy duty,
pneumatically operated, automatic spray guns with forged
brass bodies.
SPECIFICATIONS:
Maximum
Fluid Pressure: 100 psi /6.9 bar
Maximum
Air Pressure: 100 psi / 6.9 bar
Gun Body: Plated Brass
Fluid Path: Brass/ Electroless Nickle Plated
Fluid Inlet Size: 3/8" NPS(m) Thread
Air Inlet Size: 1/4" NPS(m) Thread
Gun Weight: 41 oz./ 1213 g
Mounting Hole: 1/2"
Mounting Bracket: 54-380
(1/2" Bar)
READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT
77-2976-R3.3 (7/2016)
(6220-XXXX-X)
(6235-XXXX-X)
(6219-XXXX-X)
BRASS BODY
All Model 21 spray guns feature nickel plated brass air
caps and bodies that will withstand years of use under the
toughest conditions. The Model 21V spray guns contain
tungsten carbide fluid nozzles and needles for use with
abrasive fluids. The Model 21M spray guns are internal
mix spray guns used in line striping.
PROP 65 WARNING
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth
defects or other reproductive harm.
IMPORTANT!
DO NOT DESTROY
It is the customer's responsibility to have
all operators and service personnel read
and understand this manual.
Contact your local Binks representative
for additional copies of this manual.
1 / 9
EN