Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Sideburner
[]
Loosenside burner in side shelf. (B). To loosen, unscrew and remove two front screws and
washers holding sideburner in place. (A).Note: Do not loosen electrode screw.
[]
Remove knob and bezel from sideburner control valve. To remove, pull knob straight out from
valve stem. Unscrew bezel from valve face and set the two screws aside.
[]
Insert valve stem through hole in fascia. (C). Attach bezel to fascia and valve face with
previously removed 2 screws. (D)
[]
Place sideburner tube over the valve, making sure that valve is inside sideburner tube. (E)
[]
Reattach sideburner to sideburner shelf with the 2 previously removed screws and washers.
[]
Pushcontrol knob onto sideburner valve stem.(F)
[]
Replace sideburner grate.(G)
[]
Connect both igniter wires to the igniter module on the inside of the right fascia. To connect,
push igniter wire tips onto pins in igniter module. (H)
[]
Unscrew igniter cap from control panel. Insert (1) AAA battery (not provided) into battery slot
with positive end (+) facing outward. Screw igniter cap back onto panel. (I)
B
C
16153-
50300312
* 23
Tabla de contenido
