Shimmer - Lexicon Vortex Manual De Uso

Mod Fx Lvl
ECHO 1
STEREO
RES
AM
Fbk 2
Fbk 1
Res 1 Rate 1*
Res 2* Depth 1
Mod Fx Lvl
* ENVELOPE Increases AM speed; decreases resonator tuning
ECHO FX LVL Delayed resonator/AM output level
MOD FX LVL Undelayed resonator/AM output level
FEEDBACK 1 Total gain of feedback/cross-feed mix
FEEDBACK 2 Feedback/cross-feed mix
RATE 1 Stereo AM rate
DEPTH 1 Stereo AM depth
RESONANCE 1 Resonance gain
RATE 2 Echo autopan rate
DEPTH 2 Echo autopan width (min=center, max=L to R)
RESONANCE 2 Resonator tuning
English
Shimmer B has a stereo resonator feeding a stereo amplitude
modulator, which is, in turn, sent to both the outputs and the
inputs of a cascaded echo. The output of the cascaded echoes
Echo
Fx Lvl is sent to an auto-panner before it too is sent to the outputs.
ECHO 2 PAN
Rate 2
Depth 2
creases the resonator tuning so that, as signals get louder, the speed
of the amplitude modulation increases and the tuning value de-
creases.
different frequencies based on the value of RESONANCE 2. The
amount of resonance is controlled by RESONANCE 1. At higher
values, this will produce a pronounced ringing at the tuned fre-
quency. As ENVELOPE can control this tuned frequency, many
unusual dynamic effects can be created by playing with the envelope
and resonance controls.
modulator. For any effect to be heard, this must be set to a value
greater than 1. Amplitude is modulated 90° out of phase. High values
of RATE 1 can produce "ring modulator" effects.
combining dynamic amplitude modulation and echo panning.
47
ENVELOPE increases the amplitude modulation speed and de-
This effect has a tunable resonator which allows you to emphasize
DEPTH 1 controls the amount of signal sent to the amplitude
The Preset creates a shimmering wash of sound. This is done by
B

11 SHIMMER